Paint filling machine

The automatic filling of various concentrations and viscosity liquids of oil, ежедневные химикаты, chemical industry and other industries.

1. Filling method: filling on the liquid surface (filling at the top).
2. Control method: The filling method is set by manual settings, and the micro switch is controlled.
3. Transfer method: The roller has no dynamic conveyor belt.
4. It has the function of digital display irrigation volume, which can complete the setting of multiple installations.
5. Have the function of automatic peeling and pouring in net weight.
6. It has the function of vacuum and vacuum pumping.
7. With the control system manual and automatic (micro -switch control) function.
8. Have fast and slow dual -speed control function to prevent splashing.
9. Have emergency treatment functions such as preventing misunderstanding and power outage protection.
10. The liquid flowing through the pipeline is stainless steel.

1. This machine uses the working principle of self -flow to achieve the control of the amount of filling. During the filling, the signal is given by the weighing sensor, and the time to control the filling valve through the digital controller is controlled.
2. The filling part of this machine consists of fast -filing, medium -sized installation, and slow filling. When the installation valve is opened at the beginning of the filling, the installation valve is all opened and fast -filled; the filling valve is closed until the fast -forward material value is installed to the middle of the irrigation. The installation valve is closed, and the slow -filled valve is opened and the pouring side material is turned on until the target weight.
3. This machine is equipped with a special leakage device in the filling tube to prevent the drawing or dripping phenomenon when the viscous liquid is filled.

The above parameters are standard parameters, and the specifics may change according to the difference in material speed.